| _DEVMAP_T | |
| _Tap2D | Struct to adjust probe slice rate for true airspeed |
| a2d_sample | |
| A2DBoard | |
| nidas::dynld::raf::A2DBoardTempSensor | The I2C temperature sensor on the ADS3 A2D board |
| nidas::dynld::A2DSensor::A2DBoxcarConfig | |
| nidas::dynld::A2DSensor::A2DSampleConfig | |
| nidas::dynld::A2DSensor::A2DSampleInfo | |
| nidas::dynld::A2DSensor | One or more sensors connected to an A2D |
| nidas::core::AdaptiveDespiker | Adaptive forecaster for despiking of time-series data |
| nidas::dynld::raf::ADC_HW_EB7022597 | ARINC ADC label processor |
| nidas::dynld::raf::AIO16_A2DSensor | A sensor connected to the DSM A2D |
| nidas::dynld::raf::Aircraft | Aircraft is a sub-class of a measurement Site |
| ar_channel_parms | |
| arcfg_t | ARINC label configuration structure |
| archn_t | ARINC channel configuration structure |
| ARINC_BOARD | |
| arinc_board | |
| arinc_dev | Device structure used in the file operations of the character device which provides ARINC samples |
| nidas::dynld::raf::Arinc_IRS | An Inertial Reference Sensor (IRS) connected to an ARINC port |
| nidas::dynld::AsciiOutput | |
| nidas::core::AsciiSscanf | Class providing sscanf functionality for parsing ASCII data |
| nidas::util::Autolock | Autolock is used a simple guard object for critical sections |
| BASE | |
| nidas::util::Termios::baudtable | |
| nidas::util::BitArray | A class for holding bits |
| boxcar_filter | Data object for the implementation of a boxcar filter |
| nidas::core::CalFile | A class for reading ASCII files containing a time series of calibration data |
| nidas::dynld::raf::CDP_Serial::CDP_blk | Data packet back from probe |
| nidas::dynld::raf::CDP_Serial | A class for reading PMS1D probes with the DMT interface conversion |
| nidas::dynld::raf::AIO16_A2DSensor::chan_info | |
| nidas::core::CharacterSensor | Implementation of support for a sensor which generates character output |
| nidas::core::ClientSocketConnectionThread | |
| nidas::dynld::raf::CMIGITS3_Serial | A class for reading CMIGITSIII records from an instrument attached to a serial port |
| nidas::util::Cond | A wrapper class for a Posix condition variable |
| nidas::core::ConnectionRequester | Interface for an object that requests connections to Inputs or Outputs |
| CONTROL_DPRAM | |
| counters_set | |
| nidas::dynld::isff::CS_Krypton | A class for making sense of data from a Campbell Scientific Inc CSAT3 3D sonic anemometer |
| nidas::dynld::isff::CSAT3_Sonic | A class for making sense of data from a Campbell Scientific Inc CSAT3 3D sonic anemometer |
| nidas::dynld::raf::CVI_LV_Input | Support for reading the output from the LabView process on the CVI PC |
| nidas::dynld::raf::CVIOutput | |
| nidas::dynld::raf::CVIProcessor | Processor to support Counter-flow Virtual Impactor |
| nidas::util::DatagramPacket | |
| nidas::util::DatagramPacketBase | Abstract base class for a UDP datagram |
| nidas::util::DatagramPacketT< DataT > | A DatagramPacket with a specific structure of data |
| nidas::core::DatagramSampleScanner | |
| nidas::util::DatagramSocket | A socket for sending or receiving datagrams, either unicast, broadcast or multicast |
| nidas::core::DerivedDataClient | Interface of a DerivedDataClient |
| nidas::core::DerivedDataReader | This class will read, parse and make available the parameters in the onboard real-time broadcast of data |
| nidas::util::DetachedThread | A Thread with a constructor that sets detached=true |
| digital_in | |
| DMMAT_A2D_Status | |
| DMMAT_CNTR_Config | |
| DMMAT_CNTR_Status | |
| DMMAT_D2A_Conversion | Structure describing the linear relation of counts and D2A voltage |
| DMMAT_D2A_Outputs | |
| nidas::dynld::raf::SPP100_Serial::DMT100_blk | Data packet back from probe (all unsigned little-endian): starting byte size contents -------------------------------- 0 16 2-byte cabin channel (* 8) 16 4 4-byte particles outside depth-of-field 20 4 4-byte particles outside allowed transit time 24 2 2-byte avg |
| nidas::dynld::raf::SPP200_Serial::DMT200_blk | Data packet back from probe |
| nidas::dynld::raf::SPP300_Serial::DMT300_blk | Data packet back from probe |
| nidas::core::DOMable | Interface of an object that can be instantiated from a DOM element, via the fromDOMElement method, or that can be serialized into a DOM, via the toDOMParent/toDOMElement method |
| nidas::core::DOMObjectFactory | Class that supports creating instances of DOMable objects from a string containing the class name of the object to be created |
| nidas::core::DriverSampleScanner | A SampleScanner for reading samples that have been pre-formatted by a device driver - they already have a header consisting of a timetag, and a data length |
| nidas::dynld::DSC_A2DSensor | One or more sensors connected to a Diamond Systems Corp A2D |
| nidas::dynld::DSC_AnalogOut | Support for the D2A device on a Diamond DMMAT card |
| nidas::dynld::DSC_FreqCounter | Sensor support for a frequency counter device |
| nidas::dynld::DSC_PulseCounter | Sensor support for a simple pulse counter device |
| dsm_arinc_status | ARINC channel status |
| dsm_clock_data | |
| dsm_clock_data_2 | |
| dsm_clock_sample | |
| dsm_clock_sample_2 | |
| dsm_sample | |
| nidas::dynld::raf::DSMAnalogSensor | A sensor connected to the DSM A2D |
| nidas::dynld::raf::DSMArincSensor | A sensor connected to an ARINC port |
| nidas::core::DSMCatalog | A catalog of dsm DOMElements, implemented with std::map, containing dsm DOMElements, keyed by the ID attributes |
| nidas::core::DSMConfig | Class that should include all that is configurable about a DSM |
| nidas::core::DSMConfigIterator | Class for iterating over the DSMConfigs of a Project or Site |
| nidas::core::DSMEngine | A singleton class that drives an ADS3 data collection box |
| nidas::core::DSMEngineIntf | A thread that provides XML-based Remote Procedure Calls to web interfaces from the DSMEngine |
| nidas::core::DSMEngineStat | |
| nidas::dynld::raf::DSMMesaSensor | Sensors connected to the Mesa AnythingIO card |
| nidas::core::DSMSensor | DSMSensor provides the basic support for reading, processing and distributing samples from a sensor attached to a DSM |
| nidas::dynld::DSMSerialSensor | A sensor connected to a serial port |
| nidas::core::DSMServer | A provider of services to a DSM |
| nidas::core::DSMServerIntf | A thread that provides XML-based Remote Procedure Calls to web interfaces from the DSMServer |
| nidas::core::DSMServerIterator | Class for iterating over the DSMServers of a Project |
| nidas::core::DSMServerStat | |
| nidas::core::DSMService | Base class for a service, as built from a <service> XML tag |
| nidas::core::DSMServiceIterator | Class for iterating over the DSMServices of a DSMServer |
| nidas::core::DynamicLoader | Class providing dynamic loader functionality of system functions dlopen() and dlsym() to look up symbols |
| emerald_config | |
| emerald_serial_port | |
| nidas::util::EndianConverter | Virtual base class declaring methods for converting numeric values between little-endian and big-endian representations, and for determining the endian represenation of the host system |
| nidas::util::EOFException | |
| nidas::util::Exception | |
| nidas::dynld::FileSet | Implementation of an IOChannel from a nidas::util::FileSet |
| nidas::util::FileSet | A description of a set of output files, consisting of a directory name and a file name format containing UNIX strftime conversion specifiers, like Y, m, etc |
| nidas::util::FlipConverter | EndianConverter that flips bytes, used for conversion of little-to-big and big-to-little |
| nidas::core::AsciiSscanf::FormatField | Information we determine from each conversion field in the sscanf format |
| nidas::dynld::FsMount | Filesystem mounter/unmounter |
| nidas::dynld::FsMountWorkerThread | Filesystem mounter/unmounter |
| nidas::core::FullSampleComparator | Comparator of pointers to Samples, does the same checks as SampleHeaderComparator, but in addition, if two samples compare as equal, then compares their data |
| nidas::core::GetClocks | Gets a list of current clock times for each broadcasting DSM |
| nidas::core::GetDsmList | Gets a list of DSMs and their locations from the configuration |
| nidas::core::GetStatus | Gets a list of current status reports for each broadcasting DSM |
| nidas::dynld::isff::GOES | Support for a GOES transmitter, implemented as an IOChannel |
| nidas::dynld::isff::GOESException | |
| nidas::dynld::isff::GOESOutput | A SampleOutput for packaging data for a GOES DCP Transmitter |
| nidas::dynld::isff::GOESProject | |
| nidas::dynld::isff::GOESXmtr | Support for a GOES transmitter, implemented as an IOChannel |
| GPIO_MM_fcntr_config | |
| GPIO_MM_fcntr_status | |
| nidas::dynld::raf::GPS_HW_HG2021GB02 | ARINC IRS label processor |
| nidas::dynld::GPS_NMEA_Serial | A class for reading NMEA records from a GPS attached to a serial port |
| nidas::dynld::isff::GroundStation | GroundStation is a sub-class of a measurement Site |
| nidas::core::SampleInputHeader::headerField | |
| nidas::core::HeaderSource | An interface for sending a SampleHeader to a SampleOutput |
| nidas::util::Inet4Address | Support for IP version 4 host address |
| nidas::util::Inet4NetworkInterface | |
| nidas::util::Inet4SocketAddress | A IP version 4 socket address, containing a host address, and a port number |
| nidas::dynld::raf::SPP100_Serial::Init100_blk | |
| nidas::dynld::raf::SPP200_Serial::Init200_blk | |
| nidas::dynld::raf::SPP300_Serial::Init300_blk | |
| nidas::dynld::raf::CDP_Serial::InitCDP_blk | |
| nidas::util::InterruptedException | |
| nidas::util::InvalidParameterException | |
| nidas::core::IOChannel | A channel for Input or Output of data |
| nidas::core::IODevice | An interface to an IO device |
| nidas::util::IOException | |
| nidas::core::IOStream | A base class for buffering data |
| nidas::util::IOTimeoutException | |
| irig_port | Device structure used in the file operations of the character device which provides IRIG samples |
| nidas::dynld::raf::IRIGSensor | Sensor class for controlling and recieving data from an IRIG clock |
| nidas::dynld::raf::IRS_HW_HG2001GD | ARINC IRS label processor |
| nidas::dynld::raf::IRS_HW_YG1854 | ARINC IRS label processor |
| nidas::dynld::raf::LamsSensor | |
| level_strings_t | |
| nidas::core::Linear | |
| ListenerMap | |
| nidas::util::LogConfig | A configuration to enable or disable a matching set of log points |
| nidas::util::LogContext | The LogContext is created at a point in the application code and filled in with details about that log point, such as the file and line number, and the function name of the containing function, and the log level of that log point, such as LOGGER_DEBUG or LOGGER_ERROR |
| nidas::util::Logger | Simple logging class, based on UNIX syslog interface |
| nidas::util::LoggerPrivate | |
| nidas::util::LogMessage | A class for formatting and streaming a log message |
| nidas::util::LogScheme | A LogScheme is a vector of LogConfig's and the vector of fields to show in log messages |
| nidas::core::Looper | Looper is a Thread that periodically loops, calling the LooperClient::looperNotify() method of LooperClients at the requested intervals |
| nidas::core::LooperClient | Interface of a client of Looper |
| nidas::core::McSocket | Implementation of an IOChannel, using McSocket to establish connections |
| nidas::util::McSocket< SocketT > | A McSocket provides a way to establish a TCP stream socket connection, or a pair of UDP datagram sockets using a common port number |
| nidas::util::McSocketData | |
| nidas::util::McSocketDatagram | Datagram that is multicast by a host when it wants a service |
| nidas::util::McSocketListener | |
| nidas::util::McSocketMulticaster< SocketTT > | |
| mesa_prog | |
| mesa_status | |
| nidas::core::MessageSampleScanner | A DriverSampleScanner which supports the set/get of message separation parameters |
| nidas::core::MessageStreamScanner | A SampleScanner which supports the set/get of message separation parameters and extracts samples from the internal buffer by recognizing separators in the message stream |
| nidas::dynld::isff::MOSMote::MOS_TimeSyncer | |
| nidas::dynld::isff::MOSMote | A DSMSerialSensor for support of an early, buggy version of a Mantis OS Mote, which insert null ('') characters in the middle of their output, after about every 64 characters |
| nidas::util::MulticastSocket | A datagram socket to be used for multicasts |
| nidas::util::Multisync | |
| nidas::util::Mutex | A C++ wrapper for a POSIX mutex |
| nidas::util::MutexAttributes | A C++ wrapper for a POSIX mutex attributes |
| ncar_a2d_cal_config | |
| ncar_a2d_ocfilter_config | Data used to configure on-chip filters |
| ncar_a2d_status | |
| nidas::dynld::isff::NcVarGroupFloat | |
| nidas::core::NearestResampler | A simple, nearest-point resampler, for generating merged samples from variables from one or more sample sources |
| nidas::core::NearestResamplerAtRate | A simple, nearest-point resampler, for generating merged samples from variables from one or more sample sources |
| nidas::dynld::isff::NESDISPacketInfo | |
| nidas::dynld::isff::NetcdfRPCChannel | A perversion of a simple IOChannel |
| nidas::dynld::isff::NetcdfRPCOutput | A perversion of a simple IOChannel |
| nidas_a2d_config | Fields common to all A2D configurations |
| nidas_a2d_sample_config | Information for configuring a sample from an A2D |
| nidas::util::NoFlipConverter | EndianConverter that doesn't flip bytes |
| nidas::dynld::StatisticsProcessor::OutputInfo | |
| P2d_rec | |
| nidas::dynld::isff::PacketInfo | |
| nidas::dynld::isff::PacketInputStream | |
| nidas::dynld::isff::PacketParser | |
| nidas::core::Parameter | |
| nidas::core::ParameterNameTypeComparator | Functor class for Parameter, doing an equality check of parameter name and type |
| nidas::core::ParameterT< T > | A typed Parameter, with data of type T |
| nidas::dynld::ParoSci_202BG_Calibration | Support for reading a calibration file for a ParoScientific 202BG sensor |
| nidas::dynld::ParoSci_202BG_P | Sensor support for a ParoScientific 202BG pressure sensor connected to a Diamond Systems GPIO-MM card which does the necessary frequency counting |
| nidas::dynld::ParoSci_202BG_T | Sensor support for a ParoScientific 202BG temperature sensor connected to a Diamond Systems GPIO-MM card which does the necessary frequency counting |
| nidas::util::ParseException | |
| nidas::dynld::raf::TwoD_USB::Particle | |
| pc104sg_board | Stuff needed to access the board |
| pc104sg_status | |
| pcmcom8_config | |
| pcmcom8_serial_port | |
| pickoff_filter | Data object for the implementation of a pickoff filter |
| pickoff_filter_config | Configuration data needed for pickoff filter |
| pms260x_set | |
| nidas::core::Polynomial | |
| nidas::core::PortSelectorTest | |
| nidas::dynld::raf::PPT_Serial | Honeywell PTT Pressure Transducer Serial Sensor |
| nidas::util::Process | Process provides an encapsulation of a spawned process, allowing the parent process to perform I/O with the spawned process, send it signals and wait for it to finish |
| nidas::core::ProcessorIterator | Class for iterating over the Processors of a DSMServer |
| nidas::core::Project | |
| nidas::core::ProjectConfig | |
| nidas::core::ProjectConfigs | |
| nidas::core::ProjectConfigTimeComparator | Sample time tag comparator |
| nidas::dynld::DSMSerialSensor::Prompter | |
| nidas::dynld::isff::PropVane | A serial prop vane wind sensor |
| nidas::dynld::raf::PSI9116_Sensor | Support for sampling a PSI 9116 pressure scanner from EsterLine Pressure Systems |
| nidas::dynld::psql::PSQLChannel | |
| nidas::dynld::psql::PSQLProcessor | |
| nidas::dynld::psql::PSQLSampleOutput | |
| nidas::core::Quit | Quits the DSMEngine |
| radar_set | |
| nidas::dynld::RawSampleInputStream | |
| nidas::dynld::RawSampleOutputStream | |
| nidas::dynld::RawSampleService | A RawSampleService reads raw Samples from a socket connection and sends the samples to one or more SampleIOProcessors |
| nidas::core::DSMSensor::RawSampleSource | Used for the implementation of a SampleSource for raw samples |
| nidas::dynld::isff::RebsLinear | A linear converter useful for REBS net radiometers, which have two sets of linear coefficients, one set to be applied during the day when Rnet > 0 and one when Rnet < 0: i.e |
| nidas::core::RemoteSerialConnection | |
| nidas::core::RemoteSerialListener | |
| nidas::dynld::raf::SppSerial::reqPckt | Here more for documentation |
| nidas::core::Resampler | Interface for a resampler, simply a SampleClient and a SampleSource |
| nidas::core::Restart | Restarts the DSMEngine |
| nidas::core::RTL_DevIoctl | A class providing ioctl capabilities to/from an RTL DSM device |
| nidas::core::RTL_DevIoctlStore | Singleton class holding all our RTL_DevIoctls |
| nidas::core::RTL_IODevice | A RealTime Linux implementation of a IODevice |
| nidas::util::Runnable | |
| nidas::util::RunningAverage< T, i > | Basic running average template class |
| nidas::util::RWLock | A C++ wrapper for a POSIX rwlock |
| nidas::util::RWLockAttributes | A C++ wrapper for a POSIX rwlock attributes |
| nidas::core::Sample | Interface to a sample of raw data |
| nidas::dynld::SampleArchiver | |
| nidas::core::SampleAverager | |
| nidas::core::SampleClient | Interface of a SampleClient |
| nidas::core::SampleClientList | A list of SampleClients |
| nidas::core::SampleClock | SampleClock adds date information to sample time tags |
| nidas::core::SampleConnectionRequester | Interface for an object that requests connections to SampleInputs or SampleOutputs |
| nidas::core::SampleHeader | The header fields of a Sample: a time_tag, a data length field, and an identifier |
| nidas::core::SampleHeaderComparator | Timetag and Id comparator of pointers to Samples: if two timetags are the same, then compare Ids, and if they're equal, compare data length |
| nidas::dynld::StatisticsCruncher::sampleInfo | |
| nidas::core::SampleInput | Interface of an input SampleSource |
| nidas::core::SampleInputHeader | |
| nidas::core::SampleInputMerger | SampleInputMerger sorts samples that are coming from one or more inputs |
| nidas::core::SampleInputReader | Extension of the interface to a SampleInput providing the methods needed to establish the connection to the source of samples (socket or files) and actually read samples from the connection |
| nidas::dynld::SampleInputStream | An implementation of a SampleInputReader |
| nidas::core::SampleInputWrapper | |
| nidas::core::SampleIOProcessor | Interface of a processor of samples |
| nidas::core::SampleLengthException | |
| nidas::core::SampleOutput | Interface of an output stream of samples |
| nidas::core::SampleOutputBase | Implementation of connect/disconnect portions of SampleOutput |
| nidas::dynld::SampleOutputStream | A class for serializing Samples on an OutputStream |
| nidas::dynld::SampleOutputStreamProxy | A proxy for a SampleOutputStream |
| nidas::core::SampleParseException | |
| nidas::core::SamplePool< SampleType > | A pool of Samples |
| nidas::core::SamplePoolInterface | |
| nidas::core::SamplePools | |
| nidas::core::SampleScanner | A scanner of sample data |
| nidas::core::SampleSorter | A SampleClient that sorts its received samples, using an STL multiset, and then sends the sorted samples onto its SampleClients |
| nidas::core::SampleSource | A source of samples |
| nidas::core::SampleT< DataT > | A typed Sample, with data of type DataT |
| nidas::core::SampleTag | Class describing a group of variables that are sampled and handled together |
| nidas::core::SampleTagIterator | Class for iterating over the SampleTags of a Project, Site, DSMConfig, or a SampleSource |
| nidas::core::SampleTimetagComparator | Sample time tag comparator |
| nidas::dynld::isff::SE_GOESXmtr::SE_Codes | |
| SE_GOESXmtr | |
| nidas::dynld::isff::SE_GOESXmtr | An IOChannel implementation for a Signal Engineering GOES transmitter |
| nidas::dynld::isff::SE_GOESXmtr::selfTest | |
| nidas::util::Semaphore | A POSIX semaphore |
| nidas::core::SensorCatalog | A catalog of sensor DOMElements, implemented with std::map, containing sensor DOMElements, keyed by the ID attributes |
| nidas::core::SensorHandler | SensorHandler implements a DSMSensor event loop |
| nidas::core::SensorIterator | Class for iterating over the DSMSensors of a Project, Site, or DSMConfig |
| nidas::core::SensorOpener | Thread which opens DSMSensors |
| nidas::util::SerialOptions | |
| nidas::util::SerialPort | |
| nidas::util::ServerSocket | A stream (TCP) socket that is used to listen for connections |
| nidas::core::ServerSocket | Implementation of an IOChannel, over a ServerSocket |
| nidas::core::ServerSocketConnectionThread | |
| nidas::core::ServerSocketIODevice | A sensor connected through a listening socket |
| nidas::core::ServiceCatalog | A catalog of dsm DOMElements, implemented with std::map, containing dsm DOMElements, keyed by the ID attributes |
| show_strings_t | |
| nidas::dynld::isff::SimGOESXmtr | An IOChannel implementation to simulate a GOES transmitter |
| nidas::core::Site | A measurement site |
| nidas::core::SiteIterator | Class for iterating over the Sites of a Project, or the Sites served by a DSMServer |
| nidas::core::Socket | Implementation of an IOChannel, over a Socket |
| nidas::util::Socket | A stream (TCP) socket |
| nidas::util::SocketAddress | An interface for a socket address |
| nidas::util::SocketImpl | Implementation of a socket, providing a C++ interface to system socket calls: socket,bind,listen,accept,setsockopt, etc |
| nidas::core::SocketIODevice | A base class for device IO using UDP and TCP socket |
| nidas::dynld::isff::SonicAnemometer | A class for performing the common processes on wind data from a 3D sonic anemometer |
| nidas::dynld::raf::SortByRateThenLabel | This is sorts a list of Sample tags by rate (highest first) then by label |
| nidas::dynld::SortedSampleInputStream | |
| nidas::dynld::SortedSampleOutputStream | A class for serializing Samples on an OutputStream |
| nidas::core::SortedSampleSet | A multiset for storing samples sorted by timetag |
| nidas::core::SortedSampleSet2 | A set for storing samples sorted by the timetag, id and data length |
| nidas::core::SortedSampleSet3 | |
| nidas::dynld::raf::SPP100_Serial | A class for reading PMS1D probes with the DMT interface conversion |
| nidas::dynld::raf::SPP200_Serial | A class for reading PMS1D probes with the DMT interface conversion |
| nidas::dynld::raf::SPP300_Serial | A class for reading PMS1D probes with the DMT interface conversion |
| nidas::dynld::raf::SppSerial | Base class for many DMT Probes, including SPP100, SPP200, SPP300 and the CDP |
| nidas::core::Start | Starts the DSMEngine |
| nidas::dynld::StatisticsCruncher | |
| nidas::dynld::StatisticsProcessor | Interface of a processor of samples |
| nidas::core::StatusHandler | This class implements handling routines for the SAX2 parser |
| nidas::core::StatusListener | Thread that listens to multicast messages from all of the DSMs |
| nidas::core::StatusThread | A thread that runs periodically checking and multicasting the status of a DSMEngine |
| nidas::core::Stop | Stops the DSMEngine |
| nidas::dynld::isff::SutronPacketInfo | |
| nidas::util::Synchronized | Synchronized is used a simple guard object for critical sections |
| nidas::dynld::raf::SyncRecHeaderException | |
| nidas::dynld::raf::SyncRecordGenerator | |
| nidas::dynld::raf::SyncRecordReader | |
| nidas::dynld::raf::SyncRecordSource | |
| nidas::dynld::raf::SyncRecordVariable | A Variable associated with a SyncRecord |
| nidas::core::TCPSocketIODevice | A sensor connected through a TCP socket |
| nidas::util::Termios | A class providing get/set methods into a termios structure |
| nidas::core::TestSampleClient | A little SampleClient for testing purposes |
| nidas::util::Thread | |
| nidas::util::ThreadJoiner | In certain situations one needs to "join oneself", which would be a deadlock |
| ThreadMap | |
| nidas::util::ThreadRunnable | Implements a Thread which uses a Runnable target to supply the run() method |
| nidas::dynld::iss::TiltSensor | CXTILT02 2-axis tilt sensor from Crossbow |
| timeval32 | |
| nidas::dynld::TSI_CPC3772 | Support for a TSI CPC3772 particle counter |
| tt_data_t | ARINC time tagged sample structure |
| nidas::dynld::raf::TwoD32_USB | Sensor class for the standard PMS2D probes where the data signals are converted to USB by a converter box |
| nidas::dynld::raf::TwoD64_USB | Class for the USB Fast-2DC |
| nidas::dynld::raf::TwoD_House | A class for reading and parsing the PMS2D Housekeeping (from the old interface, not the new Fast 2DC) |
| nidas::dynld::raf::TwoD_USB | Base class for PMS 2D particle probes on a USB interface |
| nidas::core::UDPSocketIODevice | A sensor connected through a UDP socket |
| nidas::dynld::raf::UDPSocketSensor | Build a generic UDP socket sensor reader |
| nidas::dynld::raf::UHSAS_Serial | A class for reading the UHSAS probe |
| nidas::core::UnixIOChannel | Simple implementation of an IOChannel, over an opened file descriptor |
| nidas::core::UnixIODevice | A simple Unix implementation of a IODevice |
| nidas::util::UnixSocketAddress | An AF_UNIX socket address |
| nidas::util::UnknownHostException | |
| usb_twod_stats | Satitistics gathered by the PMS2D USB driver |
| nidas::util::UTime | |
| nidas::util::UTime_stream_manip< charT > | |
| nidas::core::Variable | Class describing a sampled variable |
| nidas::core::VariableConverter | |
| nidas::core::VariableIterator | Class for iterating over the Variables of a Project, Site, DSMConfig, DSMSensor, or SampleTag |
| nidas::dynld::raf::VCSEL_Serial | VCSEL Serial Sensor |
| nidas::core::Version | Class of static member functions providing version strings |
| nidas::dynld::ViperDIO | Support for the digital IO on an Arcom Viper |
| nidas::dynld::isff::WindRotator | |
| nidas::dynld::isff::WindTilter | WindTilter is used to apply a 3d rotation matrix to a wind vector |
| nidas::dynld::isff::WisardMote | |
| nidas::dynld::RawSampleService::Worker | Worker thread that is run when a SampleInputConnection is established |
| nidas::dynld::XMLConfigService::Worker | Worker thread that is run when a connection comes in |
| nidas::core::XDOMAttr | Class providing convienence methods to access the string attributes of a DOMAttr |
| nidas::core::XDOMElement | Wrapper class providing convienence methods to access the string attributes of a DOMElement |
| nidas::core::XMLCachingParser | Derived class of XMLParser that keeps its DOMDocuments when parsing an XML disk file, and returns the cached DOMDocument if the file hasn't changed |
| nidas::core::XMLConfigInput | |
| nidas::dynld::XMLConfigService | |
| nidas::core::XMLConfigWriter | Wrapper class around xerces-c DOMWriter to write XML |
| nidas::core::XMLConfigWriterFilter | |
| nidas::core::XMLErrorHandler | |
| nidas::core::XMLException | Exception which can be built from an xerces::XMLException, xercesc::SAXException, or xercesc::DOMException |
| nidas::core::XMLFdBinInputStream | Implemenation of xercesc::BinInputStream, which reads from a unix file descriptor |
| nidas::core::XMLFdFormatTarget | Extension of xercesc::XMLFormatTarget support writing XML to an open device (socket for example) |
| nidas::core::XMLFdInputSource | Implemenation of xercesc::InputSource, that returns an XMLFdBinInputStream for reading from a Unix file descriptor - i.e |
| nidas::core::XMLImplementation | |
| nidas::core::XMLParser | Wrapper class around xerces-c DOMBuilder to parse XML |
| nidas::core::XmlRpcThread | A thread that provides XML-based Remote Procedure Calls to web interfaces |
| nidas::core::XMLStringConverter | Class providing conversions between string and XMLCh* using the Xerces-c transcode and release methods |
| nidas::core::XMLWriter | Wrapper class around xerces-c DOMWriter to write XML |
